Filter
Top Products
175
Choose the role of the optional accessory connected to the accessory terminal.
❚❚Remote Shutter Release
If Remote shutter release is selected, you can choose whether the shutter-release
button on optional accessory is used for photography or movie recording.
Remote
shutter release is available when an optional WR-R10 wireless remote controller is
connected to the camera and used with the shutter-release button on a WR-T10
wireless remote controller.
Remote shutter release is also available with optional
MC-DC2 remote cords (0 210).
❚❚GPS
This item is used to adjust settings for optional GPS units (0 210).
A GPS unit can be
connected to the camera’s accessory terminal (0 210) using the cable supplied with
the unit, allowing information on the camera’s current position to be recorded when
photographs are taken (turn the camera off before connecting the GPS unit; for more
information, see the GPS unit manual).
The GPS menu contains the options listed below.
• Standby timer: Choose whether the exposure meters turn off automatically when the
a GPS unit is attached.
• Position: This item is only available if a GPS unit is connected, when it displays the
current latitude, longitude, altitude, and Coordinated Universal Time (UTC) as
reported by GPS.
• Use GPS to set camera clock: Select Yes to synchronize the camera clock with the time
reported by the GPS device.
Accessory Terminal
G button ➜ B setup menu
Option Description
y Take photos
The shutter-release button on the optional accessory is used to take
photographs.
z Record movies
The shutter-release button on the optional accessory is used for movie
recording.
Press the button halfway to start live view or to focus in AF-S
and AF-F modes.
Press the button all the way down to start or end
recording.
Use the live view switch to end live view.
Option Description
Enable
Exposure meters turn off automatically if no operations are performed for the
time selected for Custom Setting c2 (Auto off timers > Standby timer, 0 160 to
allow the camera time to acquire GPS data, the delay is extended by up to one
minute after exposure meters are activated or the camera is turned on).
This
reduces the drain on the battery.
Disable Exposure meters do not turn off while a GPS unit is connected.
A Coordinated Universal Time (UTC)
UTC data is provided by the GPS device and is independent of the camera clock.