Filter
Top Products
34
s
3 Insert the memory card.
XQD memory cards: Holding the card with
the rear label toward the monitor, slide it
into the XQD card slot until it clicks into
place.
The green access lamp will light
briefly.
CompactFlash memory cards: Insert the card
into the CompactFlash card slot with the
rear label toward the monitor (q).
When
the memory card is fully inserted, the
eject button will pop up (w) and the
green access lamp will light briefly.
4 Close the card slot cover.
If this is the first time the memory card
will be used after being used or
formatted in another device, format the
card as described on page 36.
D Inserting Memory Cards
Insert the memory card terminals first.
Inserting the card upside
down or backwards could damage the camera or the card.
Check
to be sure that the card is in the correct orientation.
XQD card CompactFlash card
Access lamp
Eject button
Direction of
insertion for
left (XQD)
card slot
Rear label
4
GB
Direction of
insertion for
right
(Compact-
Flash) card
slot
Rear label