Nikon 1 J2 Camcorder User Manual


 
89
Q
❚❚ HDMI Device Control
To control the camera remotely from a device that supports
HDMI-CEC (High-Definition Multimedia Interface–Consumer
Electronics Control), select On for HDMI device control in the
camera setup menu. The HDMI-CEC device will display a remote
control guide and the remote control can be used in place of the
following camera controls:
The remote control guide can be hidden or displayed at any time
by pressing the yellow button on the remote control. See the
television manual for details.
D
Close the Connector Cover
Close the connector cover when the connectors are not in use. Foreign
matter in the connectors can interfere with data transfer.
A
Television Playback
Volume can be adjusted using the controls on the television; adjusting
volume on the camera has no effect. Use of an EH-5b AC adapter and
EP-5C power connector (available separately) is recommended for
extended playback.
Camera Remote control
1, 3, 4, 2 Up, down, left, and right buttons
J Center button
K Blue button
G Red button
Slide show menu (0 75) Green button