Filter
Top Products
188
n
Shooting (P, S, A, and M Modes)
Movies
Flicker or banding appears in movies or in the display: Choose a Flicker reduc-
tion setting that matches the local AC power supply (0 167).
No flash: See page 79. The flash will not fire when off (0 75, 77); in P, S, A,
and M modes, the flash will not fire when lowered.
Menu items are unavailable: Some options are only available in particular
shooting or exposure modes (0 181) or when wireless mobile adapter is
attached (0 80).
The shutter release is disabled: You selected mode S after choosing a shutter
speed of “Bulb” in mode M (0 36). Choose a different shutter speed.
Some shutter speeds are not available: You are using the flash.
Colors are unnatural:
• Adjust white balance to match the light source (0149).
• Adjust Picture Control settings (0 155).
Cannot measure white balance: The subject is too dark or too bright (0 152).
Picture Controls produce varying results: A (auto) is selected for sharpening,
contrast, or saturation. For consistent results over a series of photos,
choose another setting (0 157).
Noise (reddish areas and other artifacts) appears in long time-exposures: Enable
long exposure noise reduction (0 133).
Cannot record movies: The movie-record button can not be used to record
movies in best moment capture or Motion Snapshot mode (0 57, 67).
No sound is recorded for movies:
• Microphone off is selected for Movie sound options > Microphone
(0 147).
• Live audio is not recorded with slow-motion, fast-motion, or jump-cut
movies (0 48) or with Motion Snapshots recorded with None selected
for Audio (0 67).