Filter
Top Products
181
Q
Wireless and Ethernet Networks
If the optional WT-4 wireless transmitter (0 280) is attached, photographs can be
transferred or printed over wireless or Ethernet networks and the camera can also be
controlled from network computers running Camera Control Pro 2 (available
separately).
The WT-4 can be used in any of the following modes:
For more information, see the WT-4 user’s manual.
Be sure to update to the latest
versions of the WT-4 firmware and supplied software.
Mode Function
Transfer mode Upload new or existing photographs to computer or ftp server.
Thumbnail select
mode
Preview photographs on computer monitor before upload.
PC mode
Control camera from computer using Camera Control Pro 2 (available
separately).
Print mode Print JPEG photographs on printer connected to network computer.
A Transfer Mode
When the WT-4 is connected to the camera in transfer mode, the picture currently displayed
in full-frame playback can be uploaded to the computer by pressing the D and J buttons.
A Movies
The WT-4 can be used to upload movies in transfer mode if Auto send or Send folder is not
selected for Transfer settings.
Movies can not be uploaded in thumbnail selector mode.
A Recording and Viewing Movies During Transfer
Movies can not be recorded or played back in image transfer mode when a WT-4 is
connected to the camera (“image transfer mode” applies when images are being transferred
and when images remain to be sent).
A Thumbnail Select Mode
Camera settings can not be changed from the computer in thumbnail select mode.
A Camera Control Pro 2
Camera Control Pro 2 software (available separately) can be used to control the camera from
a computer.
When Camera Control Pro 2 is used to capture photographs directly to the
computer, the PC connection indicator (c) will appear in the control panel.