Filter
Top Products
38
s
Step 4: Focus
1 Press the shutter-release button halfway.
Press the shutter-release button halfway to
focus.
The active focus point will be displayed.
If
the subject is poorly lit, the flash may pop up and
the AF-assist illuminator may light.
2 Check the indicators in the viewfinder.
When the focus operation is complete, the in-
focus indicator (I) will appear in the viewfinder.
While the shutter-release button is pressed halfway, the number of exposures
that can be stored in the memory buffer (“t”; 0 79) will be displayed in the
viewfinder.
Step 5: Shoot
Smoothly press the shutter-release button the rest of
the way down to release the shutter and record the
photograph.
The access lamp next to the memory
card slot cover will light while the photograph is being
recorded to the memory card.
Do not eject the memory
card or remove or disconnect the power source until the
lamp has gone out and recording is complete.
In-focus
indicator Description
I Subject in focus.
2 4 Focus point is between camera and subject.
2 4 Focus point is behind subject.
24
(blinks)
Camera unable to focus using autofocus.
See page 93.
Focus point
In-focus
indicator
Buffer
capacity
Access lamp