Filter
Top Products
21
X
First Steps
Charge the Battery
The camera is powered by an EN-EL15 rechargeable Li-ion battery (supplied).
To
maximize shooting time, charge the battery in the supplied MH-25 battery charger
before use.
About 2 hours and 35 minutes are required to fully recharge the battery
when no charge remains.
1 Connect the AC power cable or wall adapter.
Connect the power cable as shown at right.
Use the AC
adapter plug in the position shown; do not rotate.
Depending on the country or region of purchase, an AC
wall adapter may also be supplied with the charger.
To use
the adapter, insert it into the charger AC inlet (q).
Slide
the AC wall adapter latch in the direction shown (w) and
rotate the adapter 90 ° to fix it in the position shown (e).
Reverse these steps to remove the adapter.
2 Remove the terminal cover.
Remove the terminal cover from the battery.
A
C wall adapter latch
90 °