Filter
Top Products
215
U
Choose how long the monitor remains on when no operations
are performed during playback (Playback; defaults to 10 s) and
image review (Image review; defaults to 4 s), when menus
(Menus; defaults to 20 s) or information (Information display;
defaults to 10 s) are displayed, or during live view and movie
recording (Live view; defaults to 10 minutes).
Choose a shorter
monitor-off delay for longer battery life.
Choose how long the camera will remain on stand-by in remote
release mode (0 80).
If no operations are performed for the
selected period, remote shooting will end and the exposure
meters will turn off.
Choose shorter times for longer battery life.
To reactivate remote mode after the timer has expired, press the
camera shutter-release button halfway.
Choose the pitch and volume of the beep that sounds when the camera focuses
using single-servo AF (AF-S or when single-servo AF is selected for AF-A; 0 50, 91),
when focus locks in live view, while the release timer is counting down in self-timer
and delayed remote release modes (0 80), when a photograph is taken in quick-
response remote or remote mirror-up mode (0 80), or if you attempt to take a
photograph when the memory card is locked (0 33).
Note that a beep will not
sound in quiet-shutter release mode (mode J; 0 77), regardless of the option
selected.
• Volume: Choose 3 (high), 2 (medium), 1 (low) or Off (mute).
When an option other than Off is selected, c appears in the
control panel and information display.
• Pitch: Choose High or Low.
c4: Monitor off Delay
G button ➜ ACustom Settings menu
c5: Remote on Duration
G button ➜ ACustom Settings menu
d: Shooting/Display
d1: Beep
G button ➜ ACustom Settings menu