Filter
Top Products
Technical Notes and Index
F10
Shooting Issues
Print date not
available.
Time zone and date has not been set in the setup
menu.
24, 91,
E60
Date not
imprinted on
images even
when Print
date is enabled.
• The current shooting mode does not support Print
date.
• A function that restricts the Print date function is
enabled.
• The date cannot be imprinted on movies.
91,
E64
72
–
Screen for
setting time
zone and date is
displayed when
camera is turned
on.
The clock battery is exhausted; all settings were
restored to their default values.
24, 25
Camera settings
reset.
Reset file
numbering
cannot be done.
Although a new folder is created in the internal
memory or on the memory card by resetting file
numbering, etc., if the sequential number of a folder
name (which is not displayed on the camera) reaches
the upper limit (“999”), reset is not possible. Change the
memory card, or format the internal memory/memory
card.
92,
E72
Camera
becomes hot.
The camera may become hot when used for an
extended period of time to shoot movies or send
images using an Eye-Fi card, or when used in a hot
environment; this is not a malfunction.
–
Camera makes
sound.
When Autofocus mode is set to Full-time AF or while
in some shooting modes, the camera may produce an
audible focusing sound.
69, 89
Problem Cause/Solution
A
Cannot switch
to shooting
mode.
• Disconnect the HDMI cable or USB cable.
• When the camera is connected to the electrical
outlet using the charging AC adapter, the camera
cannot switch to shooting mode.
93,
96,
E13,
E15
18
Problem Cause/Solution
A