Filter
Top Products
Technical Notes and Index
F15
Nikon Transfer 2
does not start
when camera is
connected to a
computer.
• The camera is off.
• The battery is exhausted.
• The USB cable is not correctly connected.
• The camera is not recognized by the computer.
• The computer is not set to start Nikon Transfer 2
automatically. For more information about Nikon
Transfer 2, refer to help information contained in
ViewNX 2.
22
22
93,
96
–
96
The PictBridge
screen is not
displayed when
the camera is
connected to a
printer.
With some PictBridge-compatible printers, the
PictBridge screen may not be displayed and it may be
impossible to print images when Auto is selected for
the Charge by computer option. Set the Charge by
computer option to Off and reconnect the camera to
the printer.
92,
E71
Images to be
printed are not
displayed.
• The memory card contains no images. Replace the
memory card.
• Remove the memory card to print images from the
internal memory.
20
21
Cannot select
paper size with
camera.
The camera cannot be used to select the paper size in
the following situations, even when printing from a
PictBridge-compatible printer. Use the printer to select
the paper size.
• The printer does not support the paper sizes
specified by the camera.
• The printer automatically selects the paper size.
E16,
E18
–
Problem Cause/Solution
A