Nikon 26467 Digital Camera User Manual


 
E83
Reference Section
Create Log (Record the Log of Movement
Information)
When log recording starts, the measured movement information is recorded
until a preset time has elapsed at the interval set for Log interval.
The recorded log data cannot be used by itself. To use the data, end log
recording and save it to a memory card.
1 Use the multi selector HI to
select a log to be recorded, and
press the k button.
Select a log to be recorded from the
following logs.
- Start all logs: The location data, altitude
and water depth information log data is
recorded.
- Start location log: The location data log data is recorded.
- Start depth log: The water depth information log data is recorded.
2 Select the log interval that will be
used for recording a log, and press
the k button.
The intervals that can be set for recording a
log vary depending on the log to be
recorded.
Press the d button M z (location data options) menu icon M Create
log M k button
End depth log
Start depth log
End location log
Start location log
End all logs
Start all logs
Create log
10 min
5 min
3 min
1 min
30 s
15 s
Log interval