Filter
Top Products
Technical Notes and Index
F3
B Shock and Vibration
Do not drop the camera, strike it against a hard object such as a rock, or throw it at a
water surface. Do not leave the camera in an area subject to vibration. If the camera is
subjected to excessive shock, this could result in camera malfunction or damage.
B Maximum Depth
This camera is designed to withstand water pressure up to a depth of 18 m (59 ft) for
approximately 60 minutes. At greater depth, water could seep inside the camera,
resulting in camera malfunction.
B Precautions on Handling the Camera in Cold Locations
• The operation of this camera has been confirmed at temperatures of –10°C (14°F).
If the camera is left with snow or water droplets adhered to the exterior, snow or
water droplets between the gaps may become frozen and it may be difficult to
operate parts of the camera.
• At temperatures from –10°C to 0°C (14°F to 32°F), the performance of the batteries
(number of images shot and shooting time) will drop temporarily.
• If the camera becomes extremely cold in cold locations, the monitor performance
may drop temporarily immediately after the power is turned on (i.e., the monitor
appears darker than usual or a residual image occurs).
• When using the camera in cold locations or at high altitudes, keep the camera
warm inside a protection against cold or clothing.
B Handle the Lens and All Moving Parts with Care
Do not apply force to the lens, lens cover, monitor, memory card slot, or battery
chamber. These parts are easily damaged. Applying force to the lens cover could
result in camera malfunction or damage to the lens.
B Avoid Sudden Changes in Temperature
Sudden changes in temperature, such as when entering or leaving a heated building
on a cold day, can cause condensation to form inside the device. To prevent
condensation, place the device in a carrying case or a plastic bag before exposing it
to sudden changes in temperature.
Do not expose the camera to high temperatures by leaving it on the beach or in
direct sunlight before entering the water.
B Keep away from Strong Magnetic Fields
Do not use or store this device in the vicinity of equipment that generates strong
electromagnetic radiation or magnetic fields. Strong static charge or the magnetic
fields produced by equipment such as radio transmitters could interfere with the
monitor, damage data saved on the memory card, or affect the product’s internal
circuitry.