Filter
Top Products
F16
Technical Notes and Index
Images are not
displayed on TV.
• HDMI is not correctly set in the TV
settings setup menu.
• A computer or printer is connected to the
camera.
• The memory card contains no images.
Replace the memory card. Remove the
memory card to play back images from the
internal memory.
84,
E74
96, 99,
E22
15
Nikon Transfer 2 does
not start when camera
is connected to a
computer.
• The camera is off.
• The battery is exhausted.
• The USB cable is not correctly connected.
• The camera is not recognized by the
computer.
• The computer is not set to start Nikon
Transfer 2 automatically. For more
information about Nikon Transfer 2, refer
to help information contained in ViewNX
2.
20
20
96, 99
–
101
The PictBridge startup
screen is not displayed
when the camera is
connected to a printer.
With some PictBridge-compatible printers,
the PictBridge startup screen may not be
displayed and it may be impossible to print
images when Auto is selected for the
Charge by computer option in the setup
menu. Set the Charge by computer option
to Off and reconnect the camera to the
printer.
84,
E75
Images to be printed
are not displayed.
• The memory card contains no images.
Replace the memory card.
• Remove the memory card to print images
from the internal memory.
14
15
Cannot select paper
size with camera.
The camera cannot be used to select the
paper size in the following situations, even
when printing from a PictBridge-compatible
printer. Use the printer to select the paper
size.
• The printer does not support the paper
sizes specified by the camera.
• The printer automatically selects the paper
size.
96,
E24,
E25
–
Problem Cause/Solution A