Filter
Top Products
3
With
G-type
Nikkor
lens
Position lens
in
the camera's bayonet mount so that the mounting indexes
on
lens
and camera body are aligned, then twist lens anticlockwise until it locks into
place.
(Be
~ure
not
to
touch the lens release button.)
With CPU
Nikkor
lens
with
aperture
ring
(other
than
G-type)
Position lens
in
the camera's bayonet mount so that the mounting indexes
on
lens
and camera body
are
aligned, then twist lens anticlockwise until it locks into
place.
(Be
sure not
to
touch the lens release button.) And then,
set
the
lens
aperture
to
its
minimum
and
lock
.
• When the lens is not set to its minimum aperture setting and the power switch is
turned on,
FE
E blinks
in
the LCD panel and viewfinder and the shutter cannot be
released.
Detach the lens.
• Push and hold the lens release button, then
turn the lens clockwise
to
detach the lens.
When
camera
is
left
unattended
without
lens
When you leave the camera unattended without a lens attached, be sure
to
attach
the supplied body cap (page
2)
, or optional body cap BF-1A.
(BF-1
body cap cannot
be used.)
19
•