Filter
Top Products
load
Film
--~--------\
Turn the power switch on and load OX-coded
fi
l
m.
With OX-coded film, film
speed will be set automatically
(IS
O 25-5000). When the camera back
is
closed, the film automatically advances and the number of available
exposures
is
displayed
in
the LCD panel.
.....................................................
1
Turn
the power switch
on
, open the camera back by sliding
the camera back lock release lever and load film .
2
• Film cartridge can be loaded smoothly if inserted from the bottom.
• Make sure
to
insert the film cartridge
all
the way
in
.
Pull
film leader across to red index mark.
• Make sure
to
align the film leader
to
the red index mark; if the film leader is not
properly aligned to the index mark (short of or beyond the mark), film may not be
loaded properly.
• Hold the film cartridge and ensure film is properly positioned with no slack.
NOTE
:
Loading/removing
film
Shutter curtains are very thin. Do not touch the
shutter curtains with your finger
or
the film l
ea
der.