Filter
Top Products
Standard TTL Flash
• Standard
TIL
Flash is automatically selected when the exposure mode is set
to
M. In
Standard
TIL
Flash, the main subject is correctly exposed but background exposure is
not considered. Standard
TIL
Flash is useful when you want to highlight the main
subject.
• Ready-light
•
?o
FS6
~
• When using the built-in Speed light or
an
optional Speedlight
(p
.
91)
, the ready-light
~
appears
in
the viewfinder when the Speedlight
is
fully charged and ready to fire.
• If the ready-light
~
blinks approx. 3 sec. after full flash output, underexposure may have
occurred (when using built-in Speed light or optional Speed light set to
non-TIL
Auto
Flash mode). Check the focus distance, aperture or flash shooting distance range and
shoot again.
• When the optional Speed light
is
set
to
TIL
and the shutter release button is lightly
pressed, the ready-light
~
in
the viewfinder blinks
to
indicate that the flash will be fired
at full output. Make sure
to
set the optional Speed light
to
A (non-TIL Auto Flash) or M
(Manual Flash) mode.
77
I