Filter
Top Products
HTTP://WWW.SHORTCOURSES.COM
8
THE SHORT COURSES WEB SITE AND ON-LINE DIGITAL PHOTOGRAPHY BOOKSTORE
A SHORT COURSE IN NIKON COOLPIX 4500 PHOTOGRAPHY
down point to protect it and mark it with a key
icon. (You use the same procedures to remove the
icon.)
4. When finished marking images, press the Multi
Selector’s center or right point to complete the
procedure.
5. Press the MENU button to hide the menu.
Displaying a Slide Show
1. With the camera in any shooting mode, press the
Playback button twice to display the last picture
you took full-screen.
2. Press the MENU button, press the up or down
point on the Multi Selector to highlight Slide Show
and press the right point on the Multi Selector to
display a list of choices.
3. Do one of the following:
■ Select Start and press the right point on the
Multi Selector to begin the show. To pause and
restart the show, press the center point. When
paused, you can press the other points to scroll
through frames. To cancel the show press MENU
or press the shutter button halfway down.
■ Highlight Frame Intvl and press the center point
on the Multi Selector to display a list of times
ranging from 2 seconds to 10 (3 is the default).
Highlight the interval time you want to use and
press the center or right point to select it and start
the slide show. This sets the minimum time, but it
may be longer for large files because they take
longer to load.
4. When the slide show ends, press MENU to quit, or
highlight Restart or Frame Intvl, and press the
center or right point on the Multi Selector again to
continue. A show ends automatically after 30
minutes if left unattended.
Connecting the Camera to a TV
1. Plug the black plug of the cable included with your
camera into the camera’s A/V out jack.
2. Plug the yellow plug into the TV’s video in jack and
the white plug into the audio-in jack.
3. Select NTSC or PAL modes using the Video Mode
command on the playback mode’s Set-up menu.
Hiding and Unhiding Images
1. With the camera in any shooting mode, press the
Playback button twice to display full-screen the
last picture you took.
2. Press the MENU button, press the up or down
point on the Multi Selector to highlight Hide Image
and press the right point to select it.
3. Use the left or right point on the Multi Selector to
highlight a thumbnail image and press the up
point to mark it with the hidden image icon. (You
use the same procedures to remove the icon.)
4. Press the Multi Selector’s center point to complete
the procedure.
5. Press the MENU button to hide the menu.
Selecting an Image Quality and Size
1. Press the MENU button, then do one of the follow-
ing:
■ In P, A, S, M or Auto mode, press the down point
on the Multi Selector to highlight Image Quality or
Image Size.
■ In any Scene mode, press the down point on the
Multi Selector to highlight the image quality icon
(see left) and press the center point to select it.
Press the down point on the Multi Selector to
highlight Image Quality or Image Size.
2. Press the right point on the Multi Selector to
display choices, press the up or down point to
highlight your choice, then press the center or right
point to select it.
Changing Shooting Modes
1. Hold down the MODE button and rotate the
Command Dial until P (program), a Scene mode
icon, S (shutter-priority), A (aperture-priority), or M
(manual) is displayed on the monitor.
2. Release the MODE button.
Using Scene Modes
■ To select scene mode, hold down the MODE button
and rotate the Command Dial until the Scene icon for
the most recently used Scene mode is displayed.
■ To change the Scene mode, first display one of the
Scene mode icons as described above, then press the
MENU button to display the Scene mode menu. Press
the points on the Multi Selector to highlight the icon
for the mode you want to use and its name is dis-
played at the top of the screen. Press down the center
point on the Multi Selector to select the highlighted
mode.
Using Program and Flexible Program Mode
1. With the camera on, hold down the MODE button,
turn the Command Dial until P (program) is
displayed on the monitor, then release the MODE
button.
2. To use flexible program mode, rotate the Command
Dial to cycle through any available aperture and
shutter speed combinations that yield the same
exposure. The mode indicator changes from P to P*