Filter
Top Products
15
First Steps: Setting the Time and Date
Setting the Time and Date
The camera’s clock-calendar is not set at the factory. When you first turn
on your camera, you will need to set the time and date.
1. Turn the selector dial to M-REC
After turning the dial to M-REC, wait one or two
seconds for the camera to complete start-up. The
color LCD monitor should show the camera’s
current settings superimposed on the view through
the lens. If the date has yet to be set, the date
“00.00.00/00:00” will be shown flashing at the top
right corner of the display.
Note: If there is no card currently in the camera,
in place of the camera settings the monitor will
show a message indicating that no card is present.
If the monitor is blank, press the MONITOR button
until the view through the camera’s lens is visible.
Should the monitor remain blank, check whether
the control panel on top of the camera is on. If not,
rotate the selector dial to OFF and check that the
batteries are properly inserted or that the AC
adapter is connected and plugged in.
2. Display the shooting menu
Press the MENU button to display the shooting
menu shown at left. Scroll down through the
menu by pressing the zoom-out switch (W/▼)
until the second page of the shooting menu (at left,
below) is displayed. Continue to press the zoom-
out switch until the DATE item is selected.
BK SHOOT I NG
EXP.
+
/–
METER I NG
CONT I NUOUS
LANGUAGE
SET➔SHUTTER
E
IMG
A
DJUST
WH I T E BA L
LCD BRIGHT
EXTRA FUNC
RCESET ALL
CARDFORMAT
LCD ON/OFF
SET➔SHUTTER
ON
BK
03 s AUTO OFF
DATE