Filter
Top Products
101
Basic Camera Setup: The Setup Menu
Shooting, Playback, and Setup Menus
h Sound Settings
Adjust the following sound settings:
i Auto Off
To reduce the drain on the batteries, the monitor
turns off and the camera enters standby mode, if
no operations are performed for a certain period of
time. The camera will turn off automatically if no
operations are performed for three minutes after
entering standby mode.
j Auto Off
Regardless of the option selected, the monitor will remain on for a minimum of three minutes
when menus are displayed, and for thirty minutes during a slide show.
Button sound
When [On] (default setting) is selected, beep will sound once when operations
are completed successfully, three times when error is detected.
Shutter sound
Choose shutter sound from [On] (default setting) and [Off].
Volume
Choose volume of shutter sound and start-up sound from [Loud], [Normal]
(default setting), and [Off].
Auto off
Choose the time allowed to elapse before the camera enters standby mode if no
operations are performed from [30s] (default setting), [1m], [5m], and [30m].
Sleep Mode
If [On] (default setting) is selected, the camera will enter standby mode when
there is no change in the brightness of the subject, even before the time
selected in the auto off menu has elapsed.
The camera will enter sleep mode after 30 seconds when [Auto off] is set to
[1m] or less, or after 1 minute when [Auto off] is set to [5m] or more.
• If no operations are performed for fifteen seconds when the auto off is set to
[30s] and sleep mode is [On], the monitor turns off and the power-on lamp
blinks. If no operations are performed for another fifteen seconds, the cam-
era enters standby mode.
Sound settings
Shutter sound
Volume
Button sound
MENU
Exit
Auto off
Auto off
Sleep mode
Exit