Nikon COOLPIXL28BLK Digital Camera User Manual


 
23
The Basics of Shooting and Playback
Using the Zoom
Rotate the zoom control to activate optical zoom.
To zoom in closer to the subject, rotate the zoom control
to g (telephoto).
To zoom out and view a larger area, rotate the zoom
control to f (wide-angle).
When you turn the camera on, the zoom moves to the
maximum wide-angle position.
A zoom indicator is displayed at the top of the monitor
when the zoom control is rotated.
If you rotate the zoom control to g when the camera is
zoomed in to the maximum optical zoom position, you
can use the digital zoom to magnify the image further by
up to 4×.
B Notes About Easy Auto Mode
Depending upon shooting conditions, the camera may not select the desired scene mode. In this
case, select another shooting mode (A33, 39, 42).
When digital zoom is in effect, the shooting mode is U.
C When Using a Tripod
We recommend using a tripod to stabilize the camera in the following situations.
When shooting in dimly lit conditions with the flash mode (A 45) set to W (off)
When zooming in on the subject
Zoom out Zoom in
Optical
zoom
Digital
zoom
C Digital Zoom and Interpolation
When using the digital zoom, image quality deteriorates when zooming
in past V in the zoom indicator.
The position of V is more to the right when shooting smaller images;
therefore, when the image size is smaller (as determined by the image
mode setting; A55, E22), more digital zoom can be applied without
image quality deterioration.
Small image size