Nikon COOLPIXL810BLUE Digital Camera User Manual


 
81
Recording and Playing Back Movies
4 Press the b (e movie-record) button again to end recording.
B Notes About Saving Data
After taking pictures or recording a movie, the number of exposures remaining or the remaining
recording time flashes while images or movies are being saved. Do not open the battery-
chamber/memory card slot cover while images or movies are being saved. Image and movie data
could be lost and the camera or memory card could be damaged.
B Notes About Movie Recording
Memory cards with an SD Speed Class rating of 6 or faster are recommended when recording
movies (A15). Movie recording may stop unexpectedly when memory cards with a lower Speed
Class rating are used.
There may be some degradation in image quality when digital zoom is used. If the digital zoom is
not being used when movie recording begins, turning and holding the zoom control or the side
zoom control toward g magnifies the image using optical zoom and the zoom stops at the
maximum optical zoom ratio. After letting go of the zoom control, turn the zoom control toward
g again to magnify the image using the digital zoom.
When recording ends, digital zoom turns off.
The sounds of zoom control operation, zoom, autofocus lens drive movement, vibration
reduction, and aperture operation when brightness changes may be recorded.
Smear (F3) visible in the monitor with movie recording will be recorded with movies. Avoiding
bright objects such as the sun, reflections of the sun, and electric lights is recommended.
Depending on the distance to the subject or the amount of zoom applied, subjects with repeating
patterns (fabrics, lattice windows, etc.) may have colored stripes (interference patterns, moire, etc.)
in them during movie recording and playback. This occurs when the pattern in the subject and the
layout of the image sensor interfere with each other; it is not a malfunction.
The camera may become warm when shooting movies for an extended period of time or when
the camera is used in a hot area.
B Notes About Autofocus
Autofocus may not perform as expected (A28). Should this occur, try the following:
1. Set Autofocus mode in the movie menu to A Single AF (default setting) before starting
movie recording (A 83, E45).
2. Frame another subject—positioned at the same distance from the camera as the intended
subject—in the center of the frame, press the b (e movie-record) button to start recording, and
then modify the composition.