Nikon COOLPIXL810BLUE Digital Camera User Manual


 
44
Shooting Features
Smart Portrait Mode (Capturing Smiling Faces)
When the camera detects a smiling face, you can take a picture automatically without
pressing the shutter-release button (smile timer). You can use the skin softening option to
smooth the skin tones in human faces.
1 Frame the picture.
Raise the flash when using it (A 5).
When the camera detects a human face, a yellow double border (focus area) is displayed
around that face. When the camera has focused on that face, the double border will turn
green for a moment and focus is locked.
Up to three faces can be detected. When the camera detects more than one face, a double
border is displayed around the face closest to the center of the frame, and single borders are
displayed around the other faces.
2 Wait for the subject to smile. Do not press the shutter-release button.
If the camera detects that the face framed by the double border is smiling, the Smile timer
(A46, E28) feature is activated and the shutter is automatically released.
After the camera releases the shutter, it will continue to detect faces and smiles, and will
release the shutter again if it detects a smiling face.
3 Shooting ends.
Any of the following operations can be used to cancel smile detection and stop shooting.
-Turn the camera off.
-Set Smile timer (A46, E28) to Off.
-Press the A button and select a different shooting mode.
Enter shooting mode M A (shooting mode) button M F Smart portrait mode M
k button