Filter
Top Products
54
Shooting Features
C The Flash Mode Setting
• The setting varies with the shooting mode.
➝ “Available Features” (A50)
➝ “Default Settings” (A60)
• Some settings cannot be used with other functions (A 64).
• The flash mode setting applied in A (auto) mode is saved in the camera’s memory even after the
camera is turned off.
C Red-eye Reduction
T
his camera uses Advanced Red-Eye Reduction (In-Camera Red-Eye Fix).
Pre-flashes are fired repeatedly at low intensity before the main flash, reducing the red-eye effect.
Additionally, if the camera detects red eye while saving an image, the affected area will be processed
to reduce red-eye before the image is saved.
Note the following when shooting:
• Because pre-flashes are fired, there is a slight lag between when the shutter-release button is
pressed and when the shutter is released.
• More time than usual is required to save images.
• Red-eye reduction may not produce the desired results in all situations.
• In rare cases, areas of the image that are not affected by red-eye may be processed by red-eye
reduction. In these cases, select another flash mode and take the picture again.