Nikon COOLPIXS3000P Digital Camera User Manual


 
134
Setup Menu
Basic Camera Setup
w Electronic VR
Choose whether or not electronic VR (vibration reduction) is used when taking still
pictures.
When Auto is selected, R is displayed in the monitor (A 6), and electronic VR is
applied according to shooting conditions.
B Notes on Electronic Vibration Reduction
Electronic VR does not function when the flash is used, except when slow sync mode is applied.
Electronic VR does not function when slow sync with red-eye reduction (A54, 55) is used.
Electronic VR does not function with exposures that exceed a certain length of time.
Electronic VR is activated only when ISO sensitivity (A42) is set to Auto.
Electronic VR does not function when Blink proof (A64) is set to On in smart portrait mode.
Electronic VR does not function in the following scene mode:
- Sports (A54)
- Night portrait (A54)
- Dusk/dawn (A55)
- Night landscape (A 56)
- Museum (A57)
- Fireworks show (A58)
- Backlight (A58)
The effectiveness of electronic VR decreases as camera shake increases.
The picture taken using electronic VR may be somewhat “grainy” in appearance.
D Electronic VR for Movies
To compensate for camera shake with movie recording, enable Electronic VR (A109) from the
movie menu (A108).
d button M z (Setup menu) (A126) M w Electronic VR
w Auto
Electronic VR is enabled and the effects of camera shake are reduced with shooting
of still pictures when all of the following conditions are met.
The flash is turned off or set to slow sync mode.
A slow shutter speed is used.
The Continuous setting is set to Single
The subject is dark.
Off (default setting)
Electronic VR is disabled.