Filter
Top Products
135
Connecting to a Computer
Connecting to Televisions, Computers and Printers
ViewNX 2 starts automatically when the transfer is complete (default setting of ViewNX
2). Transferred images can be viewed.
For more information on using ViewNX 2, refer to the ViewNX 2 help information
(A 136).
Disconnecting the Camera
Do not turn off the camera or disconnect the camera from the computer during
transfer.
When transfer is complete, open the slide cover and close it again to turn off the
camera, and disconnect the USB cable.
The camera turns off automatically if there is no communication with the
computer for 30 minutes while the camera is connected via the USB cable.
B Charging the Battery
The power on lamp slowly blinks orange while the battery inserted into the camera is charging (A137).