Filter
Top Products
19
Charging the Battery
First Steps
Turning On and Off the Camera
To turn on the camera, open the slide cover.
After the power-on lamp (green) lights for a moment,
the monitor will turn on.
To turn off the camera, close the slide cover.
When the camera turns off, both the monitor and
power-on lamp will turn off.
B Note on Opening the Slide Cover
Be sure to keep your fingers away from the lens when opening the slide cover.
D Power Saving Function (Auto Off)
If no operations are performed for a while, the monitor will turn off, the camera will enter standby
mode, and the power-on lamp will blink.
While the power-on lamp is blinking, press the shutter-release button to reactivate the monitor.
• Camera enters standby mode in about a minute (default setting) during shooting or playback
mode.
• The time allowed to elapse before the camera enters standby mode can be changed from the
Auto off option (A155) in the setup menu (A 145).
• When the AC Adapter EH-62D (available separately, A169) is connected, a screen saver function
is activated to prevent screen burn when no operations are performed for about a minute (default
setting, A 155).