Filter
Top Products
E68
Reference Section
Refer to the table below if an error message is displayed.
Error Messages
Display Cause/Solution
A
Memory card is write
protected.
The write-protect switch is in the “lock” position.
Slide the write-protect switch to the “write” position.
–
This card cannot be
used.
An error occurred while accessing the memory card.
• Use an approved card.
• Check that the terminals are clean.
• Confirm that the memory card is correctly inserted.
6,
F19
This card cannot be
read.
Card is not formatted.
Format card?
The memory card has not been formatted for use in the
camera.
Formatting deletes all data saved on the memory card. If you
need to keep copies of any images, make sure to select No
and save the copies to a computer or other medium before
formatting the memory card. Select Yes and press the
kbutton to format the memory card.
F6
Out of memory. Delete images or insert a new memory card. 6, 17
Image cannot be saved.
An error occurred while saving the image.
Insert a new memory card or format the internal memory or
memory card.
E65
The camera has run out of file numbers.
Insert a new memory card or format the internal memory or
memory card.
E65
There is insufficient space to save the copy.
Delete images from the destination.
17