Filter
Top Products
214
TECHNICAL NOTES—SPECIFICATIONS
Autofocus TTL phase detection by means of Nikon Multi-CAM1300 auto-
focus module; detection range –1 to 19 EV (ISO 100 at room
temperature)
Lens servo Instant Single-servo AF (S), Continuous-servo AF (C), manual (M);
focus tracking automatically activated according to subject status
in single-servo and continuous-servo AF
Focus area
Focus area can be selected from five focus areas
AF-area mode Single-area AF, Dynamic AF (supports closest subject priority)
Focus lock Focus can be locked using the AE/AF lock button or, in single-
servo AF, by pressing the shutter-release button halfway
TTL full-aperture exposure metering system with three meter-
ing modes
Exposure
metering system
3D color matrix 3D color matrix metering using 1,005-pixel CCD supported when
type G or D Nikkor lens is attached; with other lenses, color
matrix metering using 1,005-pixel CCD is supported
Center-weighted Greatest weight (75% of total) given to a circle in the center of
the frame 8 mm in diameter
Spot Exposure determined by 3-mm (0.12˝) circle in center of frame
(approximately 2% of frame); when a CPU Nikkor lens is attached,
any of the five focus areas can be used for spot metering
Exposure range At ISO 100, room temperature, and with f/1.4 lens: 0 – 20 EV
(center-weighted or 3D color matrix metering) or 2 – 20 EV (spot
metering)
Exposure
meter coupling
Combined CPU and AI
Exposure modes Programmed auto with flexible program
Shutter-priority auto
Aperture-priority auto
Manual (exposure adjustable in steps of
1
/
2
or
1
/
3
EV)
P
S
A
M
Exposure
compensation
–5 to +5 EV in increments of
1
/
3
EV; exposure compensation indi-
cator appears in viewfinder and top control panel
Auto-exposure lock Locked at detected value when AE/AF lock button is pressed
Auto bracketing 2–3 exposures compensated in steps of
1
/
3
,
1
/
2
, or 1 EV
Specifications (continued)