Filter
Top Products
CONTROLS IN DETAIL
1. SHUTTER RELEASE LEVER: Pulling the shutter release lever back part way activates the camera meter and auto focus. Pulling the lever back all
the way res the camera.
2. SUB-COMMAND INPUT / APERTURE KNOB: Rotates clockwise and counterclockwise. Use alone or in combination with other controls to select
or set various camera functions or modes. In “Manual” the exposure mode controls the aperture settings (see camera manual).
3. POWER SWITCH / ILLUMINATOR KNOB: Rotate to switch camera on or off or to engage illuminator, this can also activate the INFO function
(see CSM menu section of your camera).
4. OPTIONAL HYDROPHONE: This optional hydrophone will allow the recording of ambient sound in video mode, it is installed in the supplied
accessory hole which can be used for the remote control bulkhead connector as well)
5. NIKONOS TYPE BULKHEAD CONNECTOR: To connect Flash Sync Cord. (Manual Nikonos Type by default other option available on request).
6. OPTICAL TYPE BULKHEAD CONNECTOR: For optical type Sync Cord. (A straight cord and a elbowed Sea & Sea type adapter are supplied
when this connector is ordered).
7. FLASH MODE & EXPOSURE COMPENSATION & POP UP KNOB: rotate to engage and the ash exposure compensation or t mode of ash
synchronization, also can be used for popping up the ash inside the housing (OPTICAL FIBER CONNECTOR ONLY).
8. FLASH ACTUATING LEVER: (for optical ber version only) When knob (#7) is rotated counterclockwise it will press on the camera ash release
button allowing this
9. FLASH MODE & EXPOSURE COMPENSATION LEVER: rotate knob (#7) clockwise to engage and use sub-command dial for selecting the ash
exposure compensation or the main command dial for selecting the different mode of ash synchronization,
10. FOCUS/ZOOM KNOB: Turning allows manual focus of a single focus lens or rotation of the zoom mechanism of a lens. A release disk is provided
to disengage the knob should you want to. (used typically for disengaging the focus mechanism when a manual focus gear is used and
AF operation is required)
11. FOCUS/ZOOM PINION GEAR: Engages and operates the focus or zoom gear attached to the lens.
12. LENS RELEASE KNOB: activates the lens release button on the camera allowing easy removal of the lens.
13. LENS RELEASE KNOB LEVER: Applies pressure on the camera lens lock button
14. M/S/C FOCUS MODE SELECTOR: Rotate to select between manual, single or continuous focusing.
15. FOCUS MODE SELECTOR FORK: Engages the focus mode M/S/C selector of the camera,
16. REMOVABLE CAMERA TRAY: Used to attach camera and slide in housing.
17. HOT SHOE CONNECTOR: (supplied with standard and Hybrid version) connects the camera to the Flash Bulkhead. Slide this Connector into the
camera Hot Shoe. When detaching do not pull the cord as this might damage the electrical connections. If using Optical triggering, remove hot
shoe as it cancel the built in ash of the camera.
18. PORT RELEASE MECHANISM BUTTON: Press down to release the locking mechanism when installing or removing a port or extension.
19. HAND GRIPS (X2): Left and right grip allowing the mounting of strobe arms and accessories.
20. GRIP’S ACCESSORIES MOUNTING HOLES: Two 1/4-20 TPI holes on each grip are ready to accept TLC Base Brackets or TLC Base Ball for
strobe arms or accessories.
21. BAYONNET MOUNTING FLANGE: allows the mounting of different ports and extension rings on the housing.
22. EXPOSURE MODE BUTTON: Press to engage the mode selector button, rotate the Main Command knob to the selected exposure mode. This
button when pressed at the same time as the delete button (47) will format the card inside the camera.
23. EXPOSURE COMPENSATION BUTTON: Press to engage the Exposure compensation control [+/-]. Rotate the Main-Command knob to set the
desired exposure compensation value. The value will appear in the Top LCD panel and in the Viewnder. This button when pressed along with
QUAL (# 24) button will reset the camera shooting parameter to its default position.
24. IMAGE QUALITY/SIZE SELECTOR CONTROL: Press to access the different image quality available on the camera; use in conjunction with main
and/or sub command dial control knobs. Pressing this button and the Exposure compensation (#23) button will reset the camera shooting
parameter to its default position.
25. WHITE BALANCE: Press to access white balance functions, use in conjunction with subcommand dial (#33) to select mode and/or main dial
controls (# 2) to the select attributes of the selected mode.
26. ISO CONTROL BUTTON: Press to select ISO, use in conjunction with subcommand dial control (# 33)
page 3