Nikon D3x Camcorder User Manual


 
434
n
White balance
bracketing
2–9 frames in steps of 1, 2, or 3
Exposure lock Luminosity locked at detected value with AE-L/AF-L
button
ISO sensitivity
(Recommended
Exposure Index)
ISO 100 – 1600 in steps of
1
/3,
1
/2, or 1 EV.
Can also be
set to approx. 0.3, 0.5, 0.7, or 1 EV (ISO 50 equivalent)
below ISO 100 or to approx. 0.3, 0.5, 0.7, 1, or 2 EV (ISO
6400 equivalent) above ISO 1600.
Active D-Lighting Can be selected from [Auto], [Extra high], [High],
[Normal], [Low], or [Off]
Focus
Autofocus Nikon Multi-CAM 3500FX autofocus sensor module
with TTL phase detection, fine-tuning, 51 focus points
(including 15 cross-type sensors)
Detection range –1 – +19 EV (ISO 100, 20 °C/68 °F)
Lens servo Autofocus: Single-servo AF (S); continuous-servo AF (C);
predictive focus tracking automatically activated
according to subject status
Manual (M): Electronic range finding supported
Focus point Can be selected from 51 or 11 focus points
AF-area mode Single-point AF, dynamic-area AF, auto-area AF
Focus lock Focus can be locked by pressing shutter-release button
halfway (single-servo AF) or by pressing AE-L/AF-L
button
Flash
Flash control TTL: i-TTL balanced fill-flash and standard i-TTL flash
for digital SLR using combined 1,005-segment RGB
sensor are available with SB-900, SB-800, SB-600, or
SB-400
Auto aperture: Available with SB-900 or SB-800 and CPU
lens
Non-TTL auto: Supported flash units include SB-900,
SB-800, SB-28, SB-27, and SB-22s
Distance-priority manual
: Available with SB-900 and SB-800
Flash mode Front curtain sync, slow sync, rear-curtain sync, red-eye
reduction, red-eye reduction with slow sync
Exposure