Filter
Top Products
100
Technical Notes
Error Messages
The following table lists the error messages and other warnings displayed in the
monitor, as well as the solutions for dealing with them.
Display Problem Solution A
O (blinks) Clock not set. Set clock. 81
B Battery running low. Prepare to replace
batteries.
12, 93
N
Warning! Battery
exhausted.
Battery exhausted. Replace batteries.
Q (● blinks red) Camera cannot focus. • Refocus.
• Use focus lock.
22, 23
P
Warning!!
please wait for the
camera to finish
recording.
O
Camera cannot perform
other operations until
recording is complete.
Wait until message clears
from display automatically
when recording is
complete.
22
N
Memory card is write
protected.
Write-protect switch is in
“lock” position.
Slide write-protect switch
to “write” position.
17
P
This card cannot be
used.
Error accessing memory
card.
• Use approved card.
• Check that connectors
are clean.
• Confirm that memory
card is correctly inserted.
95
16
16
P
Warning! This card
cannot be read.
P
Card is not formatted.
Format card?
No
Yes
Memory card has not been
formatted for use in
camera.
Choose [Yes] and press k
to format card, or turn
camera off and replace
card.
17
N
Out of memory.
Memory card is full. • Choose smaller image
size.
• Delete pictures.
• Insert new memory card.
• Remove memory card
and use internal
memory.
67
24, 51,
77
16
17
Cannot copy picture. Delete pictures from
destination.
77