Filter
Top Products
97
Basic Camera Setup: The Setup Menu
Shooting, Playback and Setup Menus
d Blink Warning
Set whether or not to detect human subjects with eyes closed when shooting
pictures in the face priority (A 22).
Operating the Did someone blink? Screen
When the camera detects a human subject with closed
eyes, the Did someone blink? screen will appear on
the monitor.
The following operations are available in the Did
someone blink? screen. If no operations are
performed for a few seconds, the screen automatically
returns to the shooting mode screen.
Press dMz (setup menu) (A83) M dBlink warning
On (default setting)
When the camera detects that one or more human subjects have closed their eyes
shortly after recognizing the faces and shooting them, the Did someone blink?
screen will appear on the monitor. The face of the human subject that may have
closed his/her eyes is framed by a yellow border. In such a case, you can check the
shot picture and determine if you take the picture again. When using smile mode
(A44), the "Did someone blink?" screen is not displayed regardless of the blink
warning setting.
Off
Blink warning doesn’t take effect.
To Use Description
Enlarge and display
the detected face
g(i)Press g (i).
Switch to full-frame
playback
f(h)Press f (h).
Select the face to be
displayed
If the camera detects more than one human
subjects with their eyes closed, press
HIJK during the enlarged display to
switch over the face displayed.
Delete the shot picture l Press l.
Switch to shooting
mode
k
Press k or the shutter-release button.
Exit
Exit
Did someone blink?