Filter
Top Products
95
Basic Camera Setup: The Setup Menu
Shooting, Playback and Setup Menus
w Electronic VR
Choose whether to use electronic VR (vibration reduction) when taking still
pictures.
When Auto is selected, R appears on the monitor (A 8), and electronic VR is
applied depending on shooting conditions.
Press the d button M z (Setup menu) (A85) M w Electronic VR
Auto
When all of the following conditions are met while taking still pictures, electronic VR
is applied and the effects of camera shake are reduced.
• The flash is turned off or set to slow sync mode.
• The shutter speed is slow.
• The Continuous setting is set to Single.
• When the subject is dark.
Off (default setting)
Electronic VR is disabled.
B Notes on Electronic Vibration Reduction
• Electronic VR is disabled while the flash is used, except when using slow sync mode. Note that
Electronic VR is disabled even when flash mode is slow sync with red-eye reduction (A37, 38).
• If the exposure period exceeds a certain period of time, Electronic VR will not function.
• Electronic VR cannot be used when using the following scene modes.
-Sports (A37)
- Night portrait (A 37)
-Dusk/dawn (A39)
-Night landscape (A 39)
- Museum (A 40)
- Fireworks show (A 41)
-Backlight (A 41)
• The effectiveness of Electronic VR decreases as camera shake increases.
• Pictures taken using motion detection may be somewhat grainy.