Filter
Top Products
102
Basic Camera Setup: The Setup Menu
Shooting, Playback and Setup Menus
d Blink Warning
Choose whether or not blinking eyes are detected when using face detection
(A 24) in the following shooting modes.
• G (easy auto) mode
• Portrait (A 36) and Night portrait (A 37) scene modes
Operating the Did someone blink? Screen
The following operations are available while the Did
someone blink? screen is displayed.
If no operations are performed for a few seconds, the
screen automatically returns to the shooting mode
screen.
Press dMz (setup menu) (A 86)Md Blink warning
On
When the camera detects that one or more human subjects have closed their eyes
shortly after recognizing the faces and shooting them, the Did someone blink?
screen will appear on the monitor. The face of the human subject that may have
closed his/her eyes is framed by a yellow border. In such a case, you can check the
shot picture and determine if you take the picture again. ➝ “Operating the Did
someone blink? Screen” (A 102)
Off (default setting)
Blink warning doesn’t take effect.
To Use Description
Enlarge and display the face
of the person who blinked
g (i) Rotate the zoom control to g (i).
Switch to full-frame playback f (h) Rotate the zoom control to f (h).
Select the face to be
displayed
If the camera detects more than one
human subjects with their eyes closed,
press HIJ K during the enlarged
display to switch over the face displayed.
Delete the shot picture l Press l.
Switch to shooting mode
k
Press k or the shutter-release button.
Exit
Exit
Did someone blink?