Filter
Top Products
e
lf
focus indicator
LED
. blinks, see pages 26 to
27.
e
lf
subject moves, remove your finger from shutter release
button, then lightly press again to start autofocus with
focus tracking.
e
For
details about autofocus, see pages 20 to
23.
o blinks
*****************************
Picture blur possibility (shutter speed is
1/[focal length] sec. or slower).
Use tripod to avoid camera shake, or use
built-in
TIL
flash or accessory Nikon speed-
light
to
synchronize shutter speed
at
1/125
sec.
+ lights up ·Overexposure warning.
Too
bright - very rare condition; use film with
lower I
SO
speed.
- lights up ·Underexposure warning.
J blinks
Too
dark - use built-in
TIL
flash or acces-
sory Nikon speedlight.
Use built-in
TIL
flash or accessory Nikon
speedlight. See pages 46 to
64.
'Shutter
is
locked.
7
Fully depress shutter release button to take picture. This
automatically advances film by one frame.
e Upon shutter release, the exposure indicator
LED(s)
turns off approx. 2 sec. after you remove your finger
from the button.
e
lf
camera detects abnormality during film advance
(when film
is
loaded), the self-timer indicator
LED
blinks for a few seconds.
If
this happens, set the
shutter speed dial
to
L (lock), then proceed as
usual.
17