Filter
Top Products
E73
The Setup Menu
Reference Section
Self-timer: After Release
Set whether or not to cancel the self-timer mode (A59), or 10-second, 2-second
or 1-second remote mode (E104), after shooting pictures.
Vibration Reduction
• When using a tripod to stabilize the camera, set vibration reduction to Off.
When On is selected, an icon for this setting is displayed on the monitor (A12).
B Notes on Vibration Reduction
• After the power is turned on or the camera enters shooting mode from playback mode, wait until
the monitor screen stabilizes before shooting.
• Due to the characteristics of the vibration reduction function, images displayed on the monitor
screen immediately after shooting may appear blurry.
• Vibration reduction may be unable to completely eliminate the effects of camera shake in some
situations.
• When the Night landscape scene mode is set to Tripod, or Zoom exposure or Defocus
during exposure is selected in special effects mode, vibration reduction is not performed even if
Vibration reduction is set to On.
Press the d button M z tab (A10) M Self-timer: after release
Option Description
Exit self-timer mode
(default setting)
Cancel the self-timer mode after shooting pictures.
• The setting is not canceled in the quick-response remote or
smile timer mode (A60).
Stay in self-timer mode
Enable shooting continuously without canceling the setting,
after shooting pictures.
• The setting is cancelled when the camera is turned off.
Press the d button M z tab (A10) M Vibration reduction
Option Description
g
On
(default setting)
Compensate camera shake that commonly occurs when
shooting at the telephoto zoom position or slow shutter speed.
Camera shake is also compensated when recording movies as
well as when shooting still images. The camera automatically
detects the panning direction and only compensates for vibration
caused by camera shake.
When the camera is panned horizontally, for example, vibration
reduction only reduces vertical shake. If the camera is panned
vertically, vibration reduction only compensates for horizontal shake.
k Off
Vibration reduction is not enabled.