Filter
Top Products
147
Setup Menu
Basic Camera Setup
Sound Settings
Adjust the following sound settings.
Auto Off
When the camera is on and a period of time passes without any operations having
been performed, the monitor will be turned off and the camera will enter standby
mode (A 17) to save power.
In this option, set the time allowed to elapse before the camera enters standby
mode. 30 s, 1 min (default setting), 5 min, and 30 min can be selected.
C When the Monitor Turns off for the Power Saving Function
• Power-on lamp blinks in standby mode.
• Camera turns off after three minutes passes in standby mode.
• To reactivate the monitor while the power on lamp is blinking, press any of the following buttons:
- Power switch, shutter-release button, A button, c button or b (e movie-record) button
C Auto Off Settings
The time allowed to elapse before the camera enters standby mode is fixed in the following
situations:
• When a menu is displayed: three minutes
• During slide show playback: up to 30 minutes
• When the AC adapter EH-62G is connected: 30 minutes
d button M z (Setup menu) (A136) M Sound settings
Button sound
Select On (default setting) or Off.
When On is selected, a beep will sound once when operations are completed
successfully, twice when the camera acquires focus on the subject, and three times
when an error is detected. Start-up sound will also play when the camera is turned
on.
Shutter sound
Select On (default setting) or Off.
No sound is played with shutter release when some features such as continuous
shooting or BSS (best shot selector) are enabled, or when shooting in Pet portrait
scene mode or recording movies, even if On is selected.
d button M z (Setup menu) (A136) M Auto off