Filter
Top Products
E114
Reference Section
Error Messages
Display Cause/Solution
A
O (flashes)
Clock not set.
Set date and time.
E83
Battery exhausted. Charge or replace battery. 14, 16
Battery temperature is
elevated.
The camera will turn off.
Battery temperature is high.
Turn off camera, and allow battery to cool down before
resuming use. After five seconds, this message will
disappear, the monitor will turn off, and the power-on
lamp will flash quickly. After the lamp flashes for three
minutes, the camera will turn off automatically. Pressing
the power switch also turns off the camera.
25
The camera will turn off
to prevent overheating.
Inside of the camera has become hot.
Turn off camera, and allow battery to cool down before
resuming use.
–
Q (● flashes red)
Camera cannot focus.
• Refocus.
• Use focus lock.
30, 76
77
Please wait for the
camera to finish
recording.
Camera cannot perform other operations until saving is
complete.
Wait until message clears from display automatically
when saving is complete.
–
Memory card is write
protected.
Write-protect switch is in “lock” position.
Slide write-protect switch to “write” position.
–