Filter
Top Products
E119
Reference Section
The memory card has
been removed. Wi-Fi is
now disabled.
The memory card in the camera was removed while the
camera and the smart device were wirelessly connected.
The wireless connection has been aborted. Insert the
memory card and establish a connection again.
109
No access
Could not receive the communication signal from the
smart device. Set Wi-Fi network to On in Wi-Fi options
in the setup menu, and wirelessly connect the camera
and smart device again.
109,
E104
Could not connect
Failed to establish the connection while receiving the
communication signals from the smart device. Select a
different channel in Channel in Wi-Fi options in the
setup menu and establish the wireless connection again.
109,
E104
Wi-Fi connection
terminated.
An HDMI, USB or audio/video cable was connected to
the camera while the camera and smart device were
wirelessly connected, the battery level became low, or
the connection was aborted due to poor connectivity.
Disconnect the cable and establish the wireless
connection again.
109,
E104
Lens error
Lens error.
Turn camera off and then on again. If error persists,
contact retailer or Nikon-authorized service
representative.
24
Communications error
Error occurred during communication with printer.
Turn camera off and reconnect USB cable.
E30
System error
Error has occurred in camera’s internal circuitry.
Turn camera off, remove and reinsert battery, and turn
camera on. If error persists, contact retailer or Nikon-
authorized service representative.
14, 25
Display Cause/Solution
A