Filter
Top Products
17
Loosen
the
arm
•
knob
@.
Turn
the arm knob counterclock-
wise
as
far
as
it
will go to loosen
it
(the two bracket positioning pins
on
the bottom of the grip @ will
be visible).
19
Attach
the
cord
•
fastening
hanger ®
to
the bracket.
As
shown
in
the photo, slide the
cord fastening hanger onto the
bracke
t.
18
Attach
the bracket
• ®
to
the
arm.
Slide the open
end
of the bracket
between the arm knob
and
the grip,
seat the two bracket positioning
pin
s
in
the two indentations
on
the
bracket, and turn the arm knob
clockwise
as
far
as
it
will go to lock
the bracket into position.
20
Remove
the
• camera's
flash
sync
socket cover.
Turn the camera's sync socket
cover counterclockwise with a coin
to remove i
t.
•
Th
e correct ar
m/
br
acket position
is
wi
th
the
three washers
on
the underside of
th
e
bracket, the rubber side of the bracket facing
up, and flat si
de
of
the grip perpendicular
to
the bracket.
21.
Attach
the
camera
body
to
the bracket.
With the camera
aga
inst the rubber
side of the bracket
an
d the camera's
tripod socket over the bracket
screw, screw the bracket screw
into the camera's tripod socket
until the camera
and
bracket are
securely attached.
Nikonos·Vor Nikonos IV·A
11