Filter
Top Products
■ Cameras in Group VII (without TTL Auto Flash)
As the standby function is not available, be sure to set the camera
setting switch (inside the SB-27's battery chamber) to ˚.
NOTE
If you use the SB-27 with two cameras (one featuring TTL Auto Flash
and the other without TTL Auto Flash), we recommend setting the
camera setting switch to ˚ so that the flash mode automatically
switches to
t mode with the camera featuring TTL Auto Flash, and
to
˙ mode with the camera without TTL Auto Flash capability.
—Be sure to turn the SB-27's power OFF when the camera setting switch is
set to ˚ as the standby function will not work.
For F50-Series/N50, F-601/N6006, and F-601M
/N6000
If camera power shuts OFF with the camera setting switch (inside the
SB-27's battery chamber) set to ˚, the
t indicator in the LCD
panel changes to
˙. This is no cause for concern.
If the SB-27's flash mode selector is set to "AUTO", the
˙ indicator in
the LCD panel changes to
t enabling TTL Auto Flash operation.