Filter
Top Products
3
Pull out the built-in bounce flash adapter.
Pull out the bounce flash adapter all the way and tilt it
downward approx. 45°. (The bounce flash indicator appears
in the LCD panel.)
—Do not force the bounce flash adapter.
Close-up flash operation in AUTO mode (Cameras in Groups I
NOTE
If the bounce flash adapter comes off and you cannot set the
zoom-head position corresponding to the lens in use.
Simultaneously press the "ZOOM" and "F" buttons for approx. 4 seconds.
The zoom-head position indicator then blinks, and you can proceed with
automatic or manual zoom-head setting. Four stops (24mm, 28mm, 35mm
and 50mm) are available with the flash-head in the horizontal position, and
3 stops (35mm, 50mm and 70mm) with the flash-head in the vertical
position, depending on the camera/lens combination. (See page 20.)
1
Set the camera's exposure mode to aperture-priority
auto (A) or manual (M).
—For cameras in Group I to VI, in addition to selecting Aperture
Priority or Manual, the Close Up Program within the Vari-Programs
can also be used.
Procedures (with the SB-27 mounted on the camera)
TTL
A
M
M
ZOOM
ISO
mm
ft m
60
30
15
7
4
2
18
9
4
2
1
0.6
2
Set the SB-27's flash mode selector to “AUTO”.