Nortel Networks P7000 Digital Camera User Manual


 
42
Using Focus Mode
Basic Photography and Playback: A (Auto) Mode
Using Manual Focus
Available when the shooting mode is A, B, C, D, E, F, N or O (low noise
night). Select a shooting mode with the mode dial (A44).
1
Press p (focus mode) on the rotary
multi selector to display the setup
menu for focus mode.
Use the rotary multi selector to choose E
(manual focus) and press the k button.
W is displayed on the top of the screen,
and the image area and the enlarged
center of the picture are displayed at the same time.
2
Adjust the focus.
Use the rotary multi selector to adjust the focus while
viewing the image on the monitor.
Press H to focus on far subjects.
Press I to focus on near subjects.
When K is pressed, first the camera is focused with
autofocus, and then the manual focus can be operated.
Choose Ye s and press the k button to focus on the subject in the center of the screen
with autofocus.
Press the shutter-release button halfway to check the composition. Press the shutter-
release button the rest of the way down to take the picture.
3
Press the k button.
The set focus is locked. You can continue shooting with
the locked focus.
To readjust the focus, press the k button again to
display the screen in step 2.
To change back to autofocus, return to step 1 and choose
any setting other than E.
C E (Manual Focus)
Press the shutter-release button halfway to preview an approximate depth of field (the area in focus
behind and in front of the subject).
The digital zoom is not available.
Focus mode changes to A (Autofocus) when the monitor is turned off.
Manual focus
1/2501/250 F5.6F5.6
1/250
1/250
1/250
32
32
32
F5.6
F5.6
F5.6