Northern Industrial Tools S500 Digital Camera User Manual


 
127
Troubleshooting
Technical Notes
Pictures not displayed on televi-
sion
Choose correct video mode.
Memory card contains no pictures.
Replace memory card. Remove mem-
ory card to play back pictures from
internal memory.
111
18
PictureProject does not start
when camera is connected
Camera is off.
Battery is exhausted.
USB cable is not correctly connected.
Appropriate [USB] option is not
selected.
Camera is not recognized by the com-
puter.
Computer is not set to launch
PictureProject automatically.
See the supplied PictureProject Refer-
ence Manual (on CD) (silver) for more
information on PictureProject.
20
20
69
70
Cannot mark pictures for transfer No more than 1,000 pictures can be
marked for transfer. Click [Transfer] in
PictureProject to transfer pictures.
71
Transfer marking does not
appear
Pictures were marked for transfer using
another model of camera. Mark pictures
for transfer using COOLPIX S500.
72,
96
Cannot transfer pictures d cannot be used to transfer pictures
from internal memory when [Mass stor-
age] is selected for [USB] or if memory
card is locked. Transfer pictures using
the [Transfer] button in PictureProject.
19
Pictures to be printed or trans-
ferred are not displayed
Memory card contains no pictures.
Replace memory card. Remove memory
card to print or transfer pictures from
internal memory.
18
Cannot select paper size with
camera
Paper size cannot be selected from the
camera if the printer does not support
the page sizes used by the camera or the
printer automatically selects the page
size. Use the printer to select page size.
75, 76
Problem Cause/Solution c