Filter
Top Products
74
Connecting to a Printer
Connecting to Televisions, Computers, and Printers
Connecting the Camera and Printer
1 Set the USB option (c 70) to [PTP].
2 Turn off the camera.
3 Turn on the printer.
Check printer settings.
4
Connect the camera to the printer using the supplied USB cable.
5 Turn on the camera.
When connected correctly, the PictBridge start-up
screen 1 will be displayed in the camera monitor.
Then the print selection screen will be displayed 2.
j Connecting the USB Cable
When connecting the USB cable, be sure that the connectors are oriented correctly. Do not
use force when connecting the USB cable. When disconnecting the USB cable, do not pull the
connector at an angle.
USB
Exit
PTP
Mass storage
w
Print selection
12