Northern Industrial Tools S500 Digital Camera User Manual


 
60
The Movie Menu
Movies
Stop-Motion Movies
1 Use the rotary multi selector to choose
[Movie options] > [Stop-motion movie]
and press d.
2 Choose [Playback speed] and press d.
3 Press m.
The camera returns to shooting mode.
4 Press the shutter-release button to record the first frame.
The recorded picture will be superimposed on the view through the lens.
5 Press the shutter-release button to record the second frame.
Use the frame superimposed in the camera monitor as a guide for recording con-
secutive frames.
The monitor turns off automatically with the auto off function (c 109) if no oper-
ations are performed for 30 minutes, and recording ends.
6 Press d to end recording.
Recording will automatically stop if the internal memory or memory card becomes
full, or when 1,800 frames have been recorded.
j Time-Lapse Movie and Stop-Motion Movie
Flash mode (c 28), macro close-up mode (c 31), and exposure compensation (c 32)
cannot be adjusted after the first picture is taken. Apply the appropriate settings before
shooting begins.
To prevent the camera from turning off unexpectedly during recording, use a fully charged
battery.
To power the camera continuously for extended periods, use an AC Adapter EH-62D (avail-
able separately from Nikon) (c 114). Do not, under any circumstances, use another
make or model of AC adapter. Failure to observe this precaution could result in over-
heating or in damage to the camera.
Movie options
Exit
Stop-motion movie
5 fps
10 fps
15 fps
Playback speed
Exit