Filter
Top Products
30
EN
Creating an index of 9 frames from a
movie [INDEX]
E EDIT X INDEX
INDEX
SET
OK
MENU
BACK
1 Use FD to select a movie, and press
the x button.
2 Use
CEFD to select the fi rst frame,
and press the x button.
3 Use CEFD to select the last frame,
and press the x button.
9 frames are extracted and saved as a single
still image (INDEX).
Protecting images [0]
q PLAYBACK MENU X 0
Protected images cannot be erased by
[ERASE] (p. 15), [SEL. IMAGE], or [ALL
ERASE] (p. 31), but all images are erased
by [MEMORY FORMAT]/[FORMAT] (p. 32).
Submenu 2 Application
OFF Images can be erased.
ON
Images are protected so that
they cannot be erased except
by formatting of the internal
memory/card.
1 Use FD to select an image.
2 Use
CE to select [ON].
3 If necessary, repeat Steps 1 and 2 to
protect other images, and press the x
button.
●
Rotating images [y]
q PLAYBACK MENU X y
Submenu 2 Application
U +90°
The image is rotated 90°
clockwise.
V
0°
The image is not rotated.
t -90°
The image is rotated 90° counter-
clockwise.
1 Use FD to select an image.
2 Use CE to select the rotation direction.
3 If necessary, repeat Steps 1 and 2 to
make settings for other images, and press
the x button.
The new picture orientations will be saved
even after the power is turned off.
Adding sound to still images [R]
q PLAYBACK MENU X R
Submenu 2 Application
YES
The camera adds (records) sound
for approx. 4 seconds while
playing back the image. This
is useful for recording notes or
comments about the image.
NO No sound is recorded.
1 Use FD to select an image.
2 Aim the microphone towards the sound
source.
3 Use
CE to select [YES], and press the
x button.
Recording starts.●
Microphone
d4377_e_oima_000_book_cs2e.indb 30d4377_e_oima_000_book_cs2e.indb 30 7/1/2008 12:09:04 PM7/1/2008 12:09:04 PM