Filter
Top Products
* Close the back cover.
—The film will advance automatically and
the exposure counter on the LCD panel will
display the number "1" indicating the first
picture on the roll.
—The LCD panel will also display an "S"—to
indicate single frame advance and either
"AUTO or "AUTO S"—to indicate flash
mode. Either flash mode may be used for
point-and-shoot photography.
—Use the window in the camera back to check
type of film loaded.
—If film is improperly loaded, the LCD panel
will display a blinking "E". In this case, open
the back cover, and realign the film leader.
NOTE: Auto-S will be displayed if the camera
was in Auto-S mode prior to being
switched OFF. In all other flash
mode, the camera reverts to AUTO
when it is switched OFF. (For details
on Auto and Auto-S flash mode,
see
pgs.
21 or 23)
— 12 —