Filter
Top Products
Flash OFF
This mode is to be used in situations where a flash is prohibited (as in a museum) or
when not desired (for special effect).
Press the shutter release button half-way
to focus.
Press the shutter release button fully to
take the picture.
To cancel flash OFF mode, press the
FLASH button, or switch the camera OFF.
*Activate Flash OFF mode by pressing the
FLASH button located under the mode
cover.
—"OFF" will be displayed on the LCD panel.
NOTE: The necessary shutter speed may be
very slow (up to 2 seconds) to attain
proper exposure. To prevent blurred
pictures resulting from camera shake,
the camera should be set firmly in
position (with a tripod for example).
— 35 —