Filter
Top Products
46
4
Additional shooting functions
Recording movies
This function is for recording movies. These movies can be played back
on the camera.
1 Decide the composition of the
picture.
• The remaining recording time in the
internal memory or card is displayed on
the monitor.
2 Press the shutter button fully to
start recording.
• The card access lamp blinks while the
movie is recorded in the internal memory
or card.
• During movie recording, N lights red.
3 Press the shutter button again to stop recording.
• When the remaining recording time has been used up, recording stops
automatically.
• When there is space in the internal memory or card, the remaining recording
time (P. 27) is displayed, and the camera is ready to shoot.
Note
• Audio recording is not available.
• The flash cannot be used.
• Remaining recording time may become exhausted quickly during recording.
Try formatting the internal memory or card with your camera before continuing
recording. g“Formatting” (P. 67)
HQ
HQ
00:
0:
15
15
00:15
Remaining
recording time
00:
0:
15
15
HQ
HQ
00:15
• The camera continues to record the movie until the shutter button is pressed
again or the space in the internal memory or card is exhausted.
• A long recorded movie cannot be edited. (P. 60)
• If a single movie recording uses up all of the space in the internal memory or
card, create space by erasing the movie or downloading it to a computer.
Notes for recording long movies